Getting there
From Denver to Lake City, Colorado.
Lake City, Colorado · Colorado
Approximate distance
Estimated drive
An estimate to the start of the route does not confirm that the full drive is open. Check current road, vehicle and weather restrictions for the whole route before you leave.
Approximate drive from downtown Denver; traffic, winter conditions and walking approaches can add time. Routing uses OpenStreetMap data via OSRM.
Drive times are planning estimates. Weather, mountain roads, traffic, and seasonal closures can change your route. Check the operator’s directions before leaving.
Get directions from DenverThe experience
A place worth getting to know.
At a glance
A backcountry circuit across Cinnamon and Engineer passes, with mining history and high-elevation scenery.
| Detail | Planning information |
|---|---|
| Route start | Lake City, Colorado |
| Route finish | Lake City, Colorado |
| Route length | 63 mi. Designated Colorado byway |
| Route driving time | 4–6 hours. Byway-program planning estimate for the designated route; stops and delays are additional |
| Road surface | Unpaved, rocky high-clearance four-wheel-drive roads |
| Road restrictions | High-clearance four-wheel drive is required for Cinnamon and Engineer passes. Mud and snow can make the route impassable. |
| Charge | Free to drive by default on public roads. This does not include optional parking, camping, museums, parks or other separately charged stops. |
| Approach to route start | 253 mi / ~5 h 45 min |
| Access note | Winter closures; current pass status unconfirmed |
Route and orientation
This entry describes a scenic loop. Planning start: Lake City, Colorado. Planning finish: Lake City, Colorado. Both are sourced planning references; their exact signed-terminus or arrival-lane role is unconfirmed.
63 mi. Designated Colorado byway
The route driving-time estimate is 4–6 hours. Byway-program planning estimate for the designated route; stops and delays are additional These itinerary figures do not include the separate approach drive.
Getting to the start
The drive from downtown Denver to the start of the route is about 253 mi and ~5 h 45 min. It does not include driving the scenic route, return travel, stops or live delays. The exact signed-start or visitor-lane role of this coordinate is unconfirmed.
Road surface and restrictions
Unpaved, rocky high-clearance four-wheel-drive roads
High-clearance four-wheel drive is required for Cinnamon and Engineer passes. Mud and snow can make the route impassable.
Seasonal access
The high passes close in winter. The exact current gate status and next opening date are unconfirmed.
Route note: Winter closures; current pass status unconfirmed. Seasonal information checked 2026-11-09; the status note is valid through 2026-12-09, inclusive. Recheck the road manager before travel, especially if a high pass or unpaved section is involved. Future opening dates are unconfirmed unless explicitly stated in a dated operator notice.
Tolls and other charges
Free to drive by default on public roads. This does not include optional parking, camping, museums, parks or other separately charged stops.
Sources
- alpine-loop — checked 2026-11-09.
- cdot-program — checked 2026-10-26.
- geocode-9838f186c88370 — checked 2026-10-26.
- cdot-byway-gis — checked 2026-10-26.
A closer look
Scenic Drives at a glance.
- Route start
- Lake City, Colorado
- Route finish
- Lake City, Colorado
- Route length (mi)
- 63
- Length scope
- Designated Colorado byway
- Route driving time
- 4–6 hours
- Driving-time scope
- Byway-program planning estimate for the designated route; stops and delays are additional
- Season
- The high passes close in winter. The exact current gate status and next opening date are unconfirmed.
- Road surface
- Unpaved, rocky high-clearance four-wheel-drive roads
- Route restrictions
- High-clearance four-wheel drive is required for Cinnamon and Engineer passes. Mud and snow can make the route impassable.
Find your way
On the map.
Locations are planning references. Open a pin to read the guide.
Ready to go?
Plan your visit.
Choose your date, confirm the visit details and how to get in with the operator, and plan your route.
Keep exploring
More scenic drives nearby.
Scenic Drives nearby
On the way from Denver
Stops near the straight line from downtown Denver; check your own route.
Your questions
Before you head out.
Where does this route start and finish?
Planning start: Lake City, Colorado. Planning finish: Lake City, Colorado. Designated Colorado byway Exact signed termini and arrival roles remain unconfirmed.
How long is the scenic route and how much time should I allow?
Route length: 63 mi. Designated Colorado byway Route time: 4–6 hours. Byway-program planning estimate for the designated route; stops and delays are additional These are itinerary figures, not the approach drive; check current closures and allow additional time for stops.
How far is the route start from Denver?
The drive from downtown Denver to the start of the route is about 253 mi and ~5 h 45 min. It does not include driving the scenic route, return travel, stops or live delays. The exact signed-start or visitor-lane role of this coordinate is unconfirmed.
Is the whole route open now?
The high passes close in winter. The exact current gate status and next opening date are unconfirmed. Checked 2026-11-09; the status note is valid through 2026-12-09, inclusive. High-clearance four-wheel drive is required for Cinnamon and Engineer passes. Mud and snow can make the route impassable.
Does the drive have a toll or admission charge?
Free to drive by default on public roads. This does not include optional parking, camping, museums, parks or other separately charged stops.